Каталог продукции / Тензорезисторы / Тензорезисторы / Аксессуары и тензометрический клей

Аксессуары и тензометрический клей

Характеристики продукта

 

Accessories

Name Model Applications Specifications
Lead Solder SD-704 Strain gages soldering φ1.0,normal melting temperature 183℃
SD-705 φ2.0,high temperature melting tem.267℃
Soldering Flux S-620 Strain gages soldering 25 grams
Silver-plated Copper Wire L-706 Connecting wires φ0.15, 75 grams/roll
4-Wire Lead Wires CL-707   φ1.2, 0.42 grams/meter
High Temp.Lead Wire GL-708 Connecting,Bridging
Application
Tem.range:0-260		 φ1.2, 200 meters/roll
Varnish Wrapped Wire QL-717 Strain gages soldering φ0.15
Silicon Rubber SL-710 Cure Thickness:3mm,5mm(300x300mm)
Polishing Materials
for Adjusting
Resistance		 T-711 Adjust resistance Dia.1 micron
Tyflon Film PTFE Bonding ,Cure Width:90mm,thickness:0.05mm
Tweezers ZN-712 Bonding,holding
strain gages		 Round header,length 100mm
Brand Iron Header B-622 Soldering strain gages  
Cotton yarn M-713 Cleaning strain gages  
Brush M-714 Cleaning and bordiny
strain gages		  
Sand Paper SP-715 Polishing to remove
the oxide of
the tested object		 220#-400#
Polyimide Tape PT-716 Fixing strain gages Width 8mm,5 meter/roll

Strain gages adhesive

H-600 High Performance Epoxy

Features:
Fast drying,low viscosity,minimum creep and
hysteresis,excellent repeatability and stability,
highinsulation over a wide temperature range:
Short term:-269~+370℃;
Long term:-269~+288℃ .
Applications:
It is used to replace H-610. Excellent for bonding
of all gages and compensation resistors made by
our company.Specially recommended for high
precise transducers.
Curing Condition:
Used within 150℃:
0.1~0.3Mpa, +135℃/2hours;
Postercure:+165℃/2 hours。
Used within 250℃:
0.1~0.3Mpa,+150℃/2hours;
postercure:+175℃/2hours。
Stock Period:
6 months at 24℃ or 12 months at +2℃ in a
single composition.

H-610 High Performance Epoxy

Features:
Fast drying,low viscosity,minimum creep and
hysteresis,excellent repeatability and stability,
high insulation over a wide temperature range:
Short term:-269~+370℃;
Long term:-269~+288℃.

Applications:
Excellent for the bonding of all gages and
compensation resistors made by our company.
Specially recommended for the high precision
transducers.

Curing Condition:
Used within 150℃: 0.1~0.3Mpa. 2 houss at +135℃,
Postercure 2 hours at +165℃

Stock Period:
6 months at 24℃ or 12 months at +2℃ in a single
composition.
 
X-602 Modified Phenolic-acetal

Features:
Having a moderate viscosity, small creep and
hysteresis.Good repeatability and stability.
Operating temp.range: -30~+60℃
Applications:
Special recommended for the bonding of BE,
R series strain gages or compensation resistors.
It's possible to cure without pressure.
Curing Condition:
0.1~0.3Mpa. 2 hours at +120℃ Postercure 2
hours at +180℃.
Stock Period:
Months at room temperature.		 AZ-709 Polyure Thane

Features:
Having so excellent properties as waterproof,
moisture proof,wildew resistant and high insulation.
Dry at room temperature.
Operating temp.range -30~+60℃
Applications:
Recommended for the bonding of waterproof gages.
It may be also used for protective coating for
transducers and gages.
Curing Condition:
Cure 24 hours at room temperature also can
cure rapidly at elevated temp. for 4 hours at +80℃
Stock Period:
months at room temperature in a single composition.
 
H-611 Special Epoxy

Features:
Double composition.No solvent. Cure at normal
temperature and pressure.
Operating temperature range:-30~+60℃.
Applictions:
Special recommended for bonding of compensation
resistors.Tabs gages and stress analysisat normal
temperature and pressure.
Curing Condition:
24 hours at room temperature.
Stock Period:
10 months at room temperature in a single
composition.

A-713 Polyidide

Features:
With a stable performance, small creep and
hysteresis.
Operating temperature range:-30~+280℃

Applications:
Recommended for the bonding of high elongation
gages for measuring at middle temperature.

Curing Condition:
0.1~0.2Mpa for 1 hours at +120℃; 3 hours at +180℃

Stock Period:
12 months at +2℃
F-601 Phenolic-acetal Epoxy

Features:
With high viscosity,good stability and wide
operating temperature range.
Operating temperature range:-60~+250℃
Applications:
Recommended for the bonding of BB,BA series
strain gages. Used at moderate temperature.
Curing Condition:
0.1~0.3Mpa used within 150℃:
1 hours at +100℃; 3 hours at +150℃.
Postercure 2 hours at +170℃;
For BB series strain gages with temperature
up to 250℃:
Stock Period:
10 months at +10℃		 G-704/G-D04 Room temperature sulfid
silicon rubber

Features:
Having so excellent properties as waterproof,
moisture-proof,meldew resistant and high insulation.
Operating temperature range: -30~+100℃

Applications:
Recommended for the protective coating of
transducers and strain gages for stress analysis.

Curing Conditon:
16~24 hours at normal temperature and pressure.

Stock Period:
12 months at room temperature in single composition.

X-714 Acetal

Features:
Moderate ciscosity,easy to dilute, fast drying.
Small hysteresis, good repeatability and
stability are this kind of adhesive's characteristics.
Operating temperature range:30~+150℃
Applications:
Recommended for the bonding of BQ series
strain gages.
Curing Condition:
1~0.2Mpa for half an hour at +80℃,
2 hours at +160℃
Stock Period:
6 months at room temperature.

B-720 Cyanogen acrylate

Features:
Having good bonding,small creep and hysteresis.
And it can be used easily. But elevated temperature
and moisture will deteriorate its performance

Applications:
Recommended for the bonding of common strain
gages and for short term stress analysis.

Curing Condition:
Press with finger, Cure 3 hours at room temperature.

Stock Period:
3 months at +2℃ without direct light and moisture
resistant.
GD-711 Modified epoxy

Features:
Double composition with good bonding and can
be used easily.It also has high insulation.
Operating temperature:-60~+260℃
Applications:
Used to fix the lead wire of the strain gages.
Curing Condition:
Cure 3 hour at +60~+80℃ or 3 days at room
temperature.
Stock Period:
9 months at +2℃ for single composition 1 hour
after mixed.		  

Другие продукты из данной категории